Technical Bulletins

This Bulletin is provided in response to Safety Alert, SA17-06 – “Flameproof alternators supplying intrinsically safe equipment” issued by the NSW Department of Planning & Environment.

GE Mining wishes to advise the following to owners and end users of GE Mining vehicles or equipment installed with a GE Flameproof Alternator (also known as a PJB Flameproof Alternator).

GE Mining advises the following relating to the Intake Flametrap Gasket Material for Part Number 7-054715-700.

This bulletin outlines some modifications available for the MWM Diesel Engine System and has some recommendations that should benefit the MineCruiser, Grader and Pet vehicles.

The GE Industrea machines that use the C9 engine system listed in appendix A need to be inspected to ensure the Alternator 0V is not connected to the screens of any I.S. cables leaving the engine control flameproof enclosure.

This Bulletin is provided in response to Safety Alert, SA17-06 – “Flameproof alternators supplying intrinsically safe equipment” issued by the NSW Department of Planning & Environment.

GE Mining wishes to advise the following to owners and end users of GE Mining vehicles or equipment installed with a GE Flameproof Alternator (also known as a PJB Flameproof Alternator).

Communication: The air inlet pressure gauge hose and a metal tube between inlet manifold and fuel pump may have been connected downstream of the air inlet flame trap on all revisions of “3126” engines registered to MDR 074167 DES and MDR 040173 DES.

Communication: Air inlet manifold pressure gauge hose may have been connected directly to air intake manifold on all revisions of C9 engines registered to MDR 106483 DES.

Please note, this bulletin only affects specific machines detailed within the bulletin.

The GE Industrea machines that use the C9 engine system listed in appendix A need to be inspected to ensure the Alternator 0V is not connected to the screens of any I.S. cables leaving the engine control flameproof enclosure.

This Bulletin is provided in response to Safety Alert, SA17-06 – “Flameproof alternators supplying intrinsically safe equipment” issued by the NSW Department of Planning & Environment.

GE Mining wishes to advise the following to owners and end users of GE Mining vehicles or equipment installed with a GE Flameproof Alternator (also known as a PJB Flameproof Alternator).

Communication: Air inlet manifold pressure gauge hose may have been connected directly to air intake manifold on all revisions of C9 engines registered to MDR 106483 DES.

Please note, this bulletin only affects specific machines detailed within the bulletin.

This information is provided for owners and end users of Minecruisers installed with design registered braking system MDR 095324 TBS.

This Bulletin is provided in response to Safety Alert, SA17-06 – “Flameproof alternators supplying intrinsically safe equipment” issued by the NSW Department of Planning & Environment.

GE Mining wishes to advise the following to owners and end users of GE Mining vehicles or equipment installed with a GE Flameproof Alternator (also known as a PJB Flameproof Alternator).

GE Mining advises the following relating to the Intake Flametrap Gasket Material for Part Number 7-054715-700.

This is an addendum to the previously released bulletin 34180 Automatic Brake Function – Upon MinCruiser Service Brake Failure

This bulletin outlines some modifications available for the MWM Diesel Engine System and has some recommendations that should benefit the MineCruiser, Grader and Pet vehicles.

Referenced from Product Bulletin 31076 Bulletin PJB Alternator Ex Label 

Drive Shaft Hoop
Aeon Spring
Coolant Loss

PJB Bulletin

PJB Product Bulletin – Steering

PJB Product Bulletin

PJB Product Bulletin

PJB Product Bulletin

PJB Bulletin

The GE Industrea machines that use the C9 engine system listed in appendix A need to be inspected to ensure the Alternator 0V is not connected to the screens of any I.S. cables leaving the engine control flameproof enclosure.

This Bulletin is provided in response to Safety Alert, SA17-06 – “Flameproof alternators supplying intrinsically safe equipment” issued by the NSW Department of Planning & Environment.

GE Mining wishes to advise the following to owners and end users of GE Mining vehicles or equipment installed with a GE Flameproof Alternator (also known as a PJB Flameproof Alternator).

Please note, this bulletin only affects specific machines detailed within the bulletin.

Bulletin 33875 is applicable to GE FlitMates fitted with ZAS Zone Awareness System

The GE Industrea machines that use the C9 engine system listed in appendix A need to be inspected to ensure the Alternator 0V is not connected to the screens of any I.S. cables leaving the engine control flameproof enclosure.

This Bulletin is provided in response to Safety Alert, SA17-06 – “Flameproof alternators supplying intrinsically safe equipment” issued by the NSW Department of Planning & Environment.

GE Mining wishes to advise the following to owners and end users of GE Mining vehicles or equipment installed with a GE Flameproof Alternator (also known as a PJB Flameproof Alternator).

Please note, this bulletin only affects specific machines detailed within the bulletin.